SIMPLE DO IT YOURSELF INSTALLATION WITHOUT SPECIAL TOOLS.
Full diagrammatic detailed instructions accompany each unit which can often be easily transferred to your next car.
Overheating - Fit between radiator and grille in ADDITION to the engine fan.
Overcooling - Select to fit between radiator and grille OR radiator and engine. Remove belt driven fan - pulley and belt drive is left to drive water pump etc.
Secure fan duct to seal to radiator using the simple advanced clamping system* - no drilling or spanners needed.
Automatic Sensor - Slips under top hose seated on a silicone extruded saddle - groove for sensor tube and feathered edges enables hose to be slipped back over and clip tightened down to achieve watertight entry without cutting hose or drilling radiator. Dial cut-in temperature as shown in the instructions.