|
|
| |
| |
|
6V, 12V and
24 volt, 6", 8", 10", 13", 16" Single and Twin Fan Systems.
ONLY GENUINE
KENLOWE FANS FEATURE A UNIQUE COMBINATION OF:-
AXIAL FAN
Advanced curved multi blade axial fans cleave the air to ensure
maximum performance with reduced amperage and lower noise. Kenlowe
fans are staticly and dynamically balanced.
|
|
| |
|
|
|
STATOR
VANES
As in aircraft jet turbine engines Kenlowe 10" and 13" fans feature
stationary "stator vanes" to maximise airflow by directing the fans
rotating air, through the radiator core. Stator vanes significantly
improve air pressure resulting in greater exit volume which is what
the heat travels away from the radiator on! Stator vanes are particularly
advantageous in overcoming the resistance to air of dense or thick
radiators used in 4X4's, classic cars, competition vehicles and significantly,
vehicles with air-conditioning secondary condenser radiators or even
oil coolers which can otherwise compromise a fans cooling performance.
|
|
| |
| |
|
SEALING RING
Kenlowe fans feature ring ducts that seal to the radiator face to
eliminate any gap through which fan performance could bypass the
radiator. Air leaked away is cooling lost and only airflow that
passes through the radiator will carry heat away!
|
|
| |
|
|
|
DC ELECTRIC
MOTORS
Kenlowe motors are continuously rated and permanent magnet, suitable
for negative or positive earth cars and equally efficient for blower
and suction fan rotation. Motors are weather proof and suitable
for off road vehicle use including fording and wading involving
steep approach angle entry to riverbeds.
|
|
| |
|
|
|
ADJUSTABLE
AUTOMATIC TEMPERATURE
CONTROL
The in water sensor ensures optimum sensitivity and fast response
to rapid temperature changes. Adjustable over a wide range (55°C
- 120°C) to enable fine tuning of fan cut in temperature to ensure
compatibility with all engine thermostat operating temperature bands.
(External sensors and nonadjustable controls can fail to respond
fast enough to temperature rise and can conflict with many engine
thermostat temperature ranges). The unique Kenlowe moulded silicone
seal works with the existing radiator hose to enable the sensor
to fit without cutting the hose or drilling the radiator, as shown
diagrammatically. The Kenlowe temperature control features a tight
differential of only 3°C between cut in and cut out temperature
and in keeping with a component that is at the very heart of therm
electric engine cooling has an enviable record of reliability and
durability established over many years.
|
|
| |
|
|
|
MOUNTINGS
For simple DIY mounting, Kenlowe fans come as standard with an easy
to use advanced clamping system, ensuring that the stationary plastic
ring duct seal to the radiator to avoid any loss of efficiency due
to an air leakage gap. The easy DIY mounting has an adjustable ratchet
system that clamps the fan in place on single or twin radiator applications
without drilling, spanners or special tools. (i.e. vehicles fitted
with air-conditioning or intercooler). The simple to use, advanced
clamping system is recommended for the majority of applications
where the installation is completed by a handyman. For technical
reasons suction 13" fans are supplied with FBM fan to body easy
to fit mounting as standard at no extra cost! OPTIONAL fan to body
mountings (FBM) are available for professional or enthusiast fit
at extra cost. State single fan to body mountings part number KLM2116
or KLM2128 for twin fan systems. (Single fan to body mountings (FBM)
incorporate two infinitely adjustable mountings with 4 point swivel
connecting joints as diagram. Twin fan to body mountings (FBM) have
a plated steel frame to join up both fans with adjustable side connecting
outriggers to secure the twin fan system to vehicle presswork as
illustration).
|
|
| |
|
|
|
OPTIONAL
FACIA INDICATOR LIGHT AND MANUAL SWITCH
As with vehicles fitted with an electric fan as standard the Kenlowe
fan is fully automatic, however as an additional facility Kenlowe
offer a 'fan-on' indicator and combined manual override switch as
an extra cost option. This is offered for the enthusiast, as installation
requires the wiring to pass from the engine compartment to the interior
via the bulkhead and fire wall. It may be mounted in its under dash
panel or into the facia as required - specify part number KLM0570.
|
|
| |
